Tux, above, is a link to our
Linux Computer Services Division.If you are having problems w/ this site,
or it is slow,the logo,above, will take you to our alternate
website.
Specialty Automotive Electronics,Quadrants,
Landing Gear Selector switch, Push-PullControls,Aircraft Cable Assemblies,Engine Controls,Flight Control
Cables,
Airstair Door Cables,Trim Cables,Release Controls
Who we are:
The Aviation Division of Beechhurst Ind. is a designer & manufacturer of
electro-mechanical control systems
and related hardware for aviation and other mission critical applications.
The Company has operated continuously
in New York City for over fifty years and is classified as a small
business. FSCM: 1K050
Our products are: Federal Stock Classes: 4010 & 1680
1) Quadrants as used for engine control
2) Electro-mechanical Landing Gear selector switch
3) Electro-mechanical interconnect systems as options for the above.
4) Mechanical control interconnects and lockouts.
5) Push-pull controls: .10 to .25 diameter.
6) Control cables, aircraft (NAS 302-330) and other mechanical cable
assemblies to 3/16 diameter.
7) Custom terminations for cable assemblies.
8) Our Specialty Automotive Division develops advanced electronic vehicle
systems.
The company was started immediately after WWII to support the fast growing
local aviation community.
The primary product was aircraft control cables. Most of the company's
work was in support of local maintenance
for airlines such as Pan Am. Over the years, the company became a vendor
to many of the airframe
manufacturers including Douglas, Boeing, Republic and North American.
Spares programs were very
important for us and we helped support aircraft such as B-25, AT-6,
Catalina, Constellation,
Lodestar, F-86, PV-2, T-28, B-52.
We are currently an approved source for several of the major aerospace
contractors and also many
of the smaller subcontractors. Some of our current Military programs are:
(C)F/A-18, Navy Ejection systems,
Vertical Launch System. We also make an adjuster cable that is used in
the High Altitude suit,
and are aboard every high altitude mission: U-2, SR-71, Space
Shuttle.
In the late 1980's, we broadened our product line to become better involved
in control systems.
Much of the development work was customer driven, that is, we were asked
to design something that
was not otherwise available. Most of this work was application specific,
with limited commercial
value outside a narrow use. In the 1990's, we focused on bringing to
market some products which
were more generic, that is, with a broader use, but also unique in that
these products were
significantly different from what was currently available.
We maintain a very extensive inventory of hardware and special fittings to
provide a fast response
to requests for product. We provide fast turn-around for engineering
prototypes.
We handle AOG requests almost every day.
We have one QA and inspection system, for all our products, conforming to
the requirements of MIL-I-45208.
All products are shipped with a certificate of conformance: to all
applicable related documents as required:
MIL-C-5688, MIL-S-5002, MIL-T-781, MIL-T-6117C, MIL-W-83420D, BAC 5002
(Boeing), P.S. 14002 (McDonnell),
STP 52-600H (Lockheed). The QA Manual is available for review to
responsible parties on a need to know basis.
FACILITIES: 3,800 sqr. feet. Six rotary and non-rotary swaging machines.
Five hydraulic presses.
Basic machine shop. Proof testing equipment. Specialized machinery for
proprietary products.
CADD engineering.
Credit Card Payment
For the convenience of our customers who prefer to use a
credit card to complete a purchase,
we have signed up with PayPal as a verified merchant. Once we have verified
your order, and calculated the total with shipping, you can pay us via PayPal.
Please note the invoice total and the invoice number. The button below will
take you to a secure PayPal site.
Enter the E-Mail address you see here, invoice information, along with the other
usual on-line purchase information. PayPal will notify us when
you have completed the payment, and we will ship the next business day.
Please not that payment is processed by PayPal, and we are not setup to
accept credit cards directly.
Please DO NOT send us your credit card information.
The above button will take you to a PayPal site.
Use the E-Mail address you see here for the "pay to:" E-Mail address.
Alternately, if you do not want a PayPal account, you can request
that we send an electronic invoice that will allow to pay without a PayPal account.
Privacy Policy:
Your communications with us are completely confidential. We do not maintain
E-Mail mailing lists.
we do not use Outlook Express. If we feel the need to make an
announcement, we will post it to the
appropriate newsgroup, or use the Postal System. Your E-Mail address is
safe with us,
and will not be disclosed to others.
Important Notice: Copyright Information & Ownership of material on this
Web-Site
Beechhurst Industries owns the images and text found on our web site.
We consider all material found on this website to be our intellectual
property.
We retain all rights and titles to our artwork and downloaded copies of our
artwork
CANNOT be used for commercial purposes.
Beechhurst Industries can provide your organization with final engineering
drawings.
Since engineering time is usually the most expensive of a Company's time,
the small cost of
having a final drawing done by Beechhurst will be far less than trying to
do it in house.
In addition, using us to supply the drawings of prototypes we have built
is clearly the
surest way to obtain an accurate drawing of the product.
When your organization purchases a drawing, we transfer all rights and
titles to that particular
artwork to you, that is, you now own it. Please note that Beechhurst
Industries owns and retains
all rights and titles to all our other artwork, including artwork found
on our web site.
While you may download images from our web site, they are still our
property and CANNOT
be used for commercial purposes.
The drawings will be supplied in hardcopy (8 1/2 x 11) and E-Mailed as a
DXF file.
Individual drawings (one part number) are $ 350.
A group drawing (covering one part number with several dash number
variants) is $ 1,000.
